Readme file for HPT370/372/372A/372N/302/302N Controller driver for Windows Vista
Copyright (C) HighPoint Technologies, Inc. All rights reserved.

Last updated on Jan 26, 2007

Please review this file for important information about compatibility issues and 
differences in operation that were discovered after our product manuals were 
created. In case of conflict among various parts of the documentation set, this 
file contains the most current information.

Note: The latest firmware and product documentation will be available for 
download at http://www.highpoint-tech.com


This file is divided into the following major sections:

1. Software Version
2. Files Listing
3. Revision History
4. Installation Guide

1. Software Version
====================

    Driver version: v2.352
    
    Operating Systems:
       Windows Vista x32 and x64

    Version Compatibility:
       This BIOS/driver can be used with HighPoint RAID Management Software v2.32
       or later.

2. Files Listing
=================
    Readme.txt               This file
    x32                      Windows Vista x32 driver
     |_ hpt3xx.inf
     |_ hpt3xx.cat
     \_ hpt3xx.sys
    x64                      Windows Vista x64 driver
     |_ hpt3xx.inf
     |_ hpt3xx.cat
     \_ hpt3xx.sys


3. Revision History
====================
   v2.352 01/26/2007
         * Support Vista

   v2.351 01/05/2004
         * Add "use private stack" option in BIOS (to fix DOS6.22 booting fail)
         * Fix 66M PCI support

   v2.35  08/04/2003
         * Add 302/302N support
	
   v2.345 05/09/2003
         * Fix compatibility issue with Intel SATA RAID BIOS
         * Fix Windows "LDM configuration disk write error"

   v2.344 04/11/2003
         * Fix clock calculation
         * Fix driver compatibility issue on SOYO SY-P4IP mainboard

   v2.342 03/24/2003
         * Fix HPT370A timing
         * Add RAID 1.5 support

   v2.34 10/17/2002
         * Add HPT372N controller support
         * Fix hptpro.sys compatibility issue with NIS2003 on FAT partition

   v2.33 09/17/2002
         * Fix 48bit LBA compatibility
         * Add RocketMate support

   v2.32 07/01/2002
         * Fix 48bit LBA formatting issue
         * Fix hptpro.sys problem on Windows XP system restore and sparse files
         * use PMM to allocate BIOS memory
         * Disable BIOS EBDA reallocation by default

   v2.31 01/09/2002
         * Performance improved
         * Fix BIOS compatibility issue with Adaptec SCSI
         * Fix Seagate Barracuda III and IV mode to ATA100
         * Show capacity by 1G=1,000,000,000 Bytes
         * Fix BIOS bug "drive capacity incorrect after deleting a broken array"

   v2.3  12/20/2001
         * Add support for stripe size 128K-2M
         * Support multi controller
         * Modify driver for HPT370/370A compatibility
         * Fix reading ATA/133 disk error when PCI clock is lower than 33MHz
         * Fix compatibility problem with Intel IAA driver under Windows ME
         * Fix BIOS compatibility issue with MSI845 mainboard

   v2.2  12/08/2001

         * Performance improved
         * Fix GUI re-open bug when rebuilding an array
         
   v2.1  11/15/2001
         
         * Add 48bit LBA (Big Drive) support
         * Fix BIOS display problem on S3 display adapter
         * Fix BIOS BBS support
         * Fix Windows ME hibernating problem


4. Installation Guide
=====================
INSTALL DRIVER FOR A FRESH WINDOWS VISTA INSTALLATION
-------------------------------------------------------------------------------

1. Boot from Windows Vista DVD.

2. When the screen "where do you want to install Windows" appears, click
   "Load driver" and browse for the driver location. You can put the driver
   on a floppy, USB disk or CD.

3. Select the HPT3xx controller driver and click "Next".

4. The driver will be loaded and you can continue the installation.


INSTALL DRIVER ON A EXISTING WINDOWS VISTA SYSTEM
-------------------------------------------------------------------------------

1. Install the adapter and boot up Windows.

2. Windows will popup "Found New Hardware" wizard. Select "Locate and install
   driver software". When Windows asks "Windows needs your permission to
   continue", select "continue".
   
3. Select "I don't have disc, show me other options" and then select
   "Browse my computer for driver software".
   
4. Specify the folder where you put the driver and click "Next".

5. When asked "Would you like to install this driver software?", select
   "Install".
   
6. Reboot the system and the adapter will be available.
