
     		IC Plus IP100 10/100 Fast Ethernet Adapter
                         Windows NDIS driver 


Contents:
---------

1. File Description
2. Driver Installation for Windows NT 4
3. Parameters Description

1. File Description
-------------------

Filename              Description
=================     =====================================================
README.TXT            Presents a summary of the contents for Windows NDIS
                      driver installation.

oemsetup.inf          Windows installation INFormation file for install

ipfnd4.sys            Windows NT 4 (NDIS 4) driver

2. Driver Installation for Windows NT 4
------------------------------------------------

    The Windows installation floppy or CD is needed to complete this
    installation.

    Adapter Installation Procedure
    --------------------------------------------

    a. Make sure your computer is power-off.

    b. Plug the adapter into one PCI 33MHz slot of your computer.

    c. Turn on the power. 

    Install and/or Update driver from diskette
    ------------------------------------------
    
     The following steps will lead you to install  ...

     a. Click Start->Settings->Control Panel. Double-click Network to start 
	the Network Control Panel Application(NCPA). 

     b. Select "Adapter" tab. Click "Add...".

     c. Click "Have Disk".

     d. Specify the path.
        (A:\ , assume A: is floppy drive)
        (D:\ , assume D: is CD drive) 
        
     e. Choose the adapter.
        IC Plus IP100 10/100 Fast Ethernet Adapter
        Click "OK" to continue. "Connection Type" dialog display, default
	is "AutoSense". Click "OK" to continue.

     f. Select "Bindings" tab. System will do "Bind to adapter" setting 
	automatically.

     g. Select "Protocols" tab. Select "TCP/IP Protocol". Click "Properties".
	set your IP address by DHCP or specified IP address.

     h. If you select "Obtain an IP address from a DHCP Server", then system 
	will ask you "Do you want to enable DHCP ?" Click "Yes".

     i. Click "Apply". Then Click "OK". Then Click "Close".
	System will ask you to reboot. Click "Yes".

3. Parameter Description
------------------------
   	- Click Start->Settings->Control Panel. Double-click Network to start 
	the Network Control Panel Application(NCPA). Select "Adapter" tab.
	Choose the adapter - IC Plus IP100 10/100 Fast Ethernet Adapter	
   
        Connection Type      Specify the connection type for the adapter.
                             Default: Auto-Sense
