======================================================================
     ULi SATA/RAID controller driver

                  Copyright 2004-2005 ULi Electronics Inc.
                       All Rights Reserved
======================================================================

------------
INTRODUCTION
------------
This driver supports ULi SATA/RAID controller.


-------------------------
CONTENTS OF THIS DOCUMENT
-------------------------
1. Installation Instructions
2. Uninstallation Instructions
3. Driver File List
4. Driver Change List


----------------------------
1. Installation Instructions
----------------------------
  After the adapter is installed and recognized by computer, user can 
  start the installation of driver.


----------------------------------------------------------------------
----------------------------------------------------------------------
* Windows 2000
Install driver under existing Windows 2000
  After Windows 2000 is start-up, Windows system will automatically
  find the newly installed adapter and prompt user to install its
  driver. Please follow these steps to install the driver:

  A) With installation setup program:
   1. When the Found New Hardware Wizard windows appear, click Cancel
      button to end the Wizard.
   2. Double click setup.exe;
   3. Confirm the following dialogue windows, and restart the computer
      when system prompt user to restart.

  B) Manual installation:
   1. When the Found New Hardware Wizard windows appear(Mass Storage 
      Controller), click Next button to continue, in the follow-up window, 
      please select Display a list... and then click Next to continue;
   2. In the follow-up window, select SCSI and RAID Controllers and 
      then click Next to continue;
   3. In the follow-up window, click Have Disk..., then insert the 
      driver diskette and type in the driver location: A:\Win_32,
      then click OK to continue;
   4. In the follow-up window, select ULi SATA/RAID Controller, 
      then click Next to continue;
   5. Confirm the followup windows and click the Finish button to
      continue;
   6. Please 'confirm' the Digital Signature Not Found window when it
      appears, when finshed, please restart the computer;

Install driver during Windows 2000 installation
   0. After you unpack driver, please copy files under subdirectory
      M5287 to the root directory of floppy diskette (called driver
      diskette).
      Therefore, in root directory of floppy diskette you will see:
      (1) Files "disk1" and "txtsetup.oem",
      (2) Directory "win_32", "win_64" and related driver files in each 
	directory.
      (please refer to "Driver File List" as below)
   1. Booting from CD-ROM, when the Windows 2000 Setup blue screen
      appear and prompt user to Press F6 if you need to install third
      party SCSI or RAID driver, please press F6 key:
   2. The setup program will continue, later when the setup program
      prompts user to specify additional adapters, please press S
      Key.
   3. Then the setup program prompt user to insert the driver
      diskette. Please insert the driver diskette, then press ENTER 
      to continue;
   4. The follow-up window will list out the installation choices, 
      please select ULi SATA/RAID Controller for Windows 2000 and 
      press ENTER to continue;
   5. The Follow-up window will list out the devices to be installed,
      in which selected ULi controller should be included;
   6. If users want to install other devices, please operate at this time. 
      If all devices have been successfully installed, go to next step.
   7. Press ENTER to continue Windows 2000 setup.  


----------------------------------------------------------------------
* Windows XP
Install driver under existing Windows XP
  After Windows XP is start-up, Windows system will automatically
  find the newly installed adapter and prompt user to install its
  driver. Please follow these steps to install the driver:

  A) With installation setup program:
   1. When the Found New Hardware Wizard windows appear, click Cancel
      button to end the Wizard.
   2. Double click setup.exe;
   3. Confirm the following dialogue windows, and restart the computer
      when system prompts user to restart.

  B) Manual installation:
   1. When the Found New Hardware Wizard windows appear(Mass Storage 
      Controller), select Install from a list or specify location(Advanced) 
      and click Next to continue;
   2. In the follow-up window, please select "Don't search, I will 
      choose the driver to install", then click Next to continue;
   3. In the follow-up window, please select SCSI and RAID 
      controllers, and then click Next to continue;
   3. In the follow-up window, click Have Disk..., then insert the 
      driver diskette and type in the driver location: A:\Win_32,
      then click OK to continue;
   4. In the follow-up window, select ULi SATA/RAID Controller,
      then click Next to continue;
   5. Confirm the followup windows and click the Finish button to
      continue;
   6. Please "confirm" the Digital Signature Not Found window when it
      appears, when finshed, please restart the computer;

Install driver during Windows XP installation
   0. After you unpack driver, please copy files under subdirectory
      M5287 to the root directory of floppy diskette (called driver
      diskette).
      Therefore, in root directory of floppy diskette you will see:
      (1) Files "disk1" and "txtsetup.oem",
      (2) Directory "win_32", "win_64" and related driver files in each 
       directory.
      (please refer to "Driver File List" as below)
   1. Booting from CD-ROM, when the Windows XP Setup blue screen
      appear and prompt user to Press F6 if you need to install third
      party SCSI or RAID driver, please press F6 key:
   2. The setup program will continue, later when the setup program
      prompts user to specify additional adapters, please press S
      Key.
   3. Then the setup program will prompt user to insert the driver
      diskette. Please insert the driver diskette, then press ENTER 
      to continue;
   4. The follow-up window will list out the installation choices, 
      please select ULi SATA/RAID Controller for Windows XP 
      and press ENTER to continue;
   5. The follow-up window will list out the devices to be installed,
      in which selected ULi controller(s) should be included;
   6. If users want to install other devices, please operate at this time. 
      If all devices have been successfully installed, please go to next 
      step.
   7. Press ENTER to continue Windows XP setup.

----------------------------------------------------------------------
* Windows Vista (tested on Vista beta Build 5320)
Install driver under existing Windows Vista
  After Windows Vista is start-up, Windows system will automatically
  find the newly installed adapter and prompt user to install its
  driver. Please follow these steps to install the driver:

   With installation setup program:
   1. When the Found New Hardware Wizard windows appear, click Cancel
      button to end the Wizard.
   2. Double click setup.exe;
   3. Confirm the following dialogue windows, and restart the computer
      when system prompts user to restart.


Install driver during Windows Vista installation
   0. After you unpack driver, please Copy "All files" in i386 (AMD64) 
      Directory to your root directory of floppy diskette.
   1. Booting from CD-ROM, when show "select partition" and please insert 
      the driver diskette and click "Load Driver", then select ULi 5287 
      SATA/RAID Controller.
   2. The follow-up window will complete device installed, and show message
   3. Press ENTER to continue Windows Vista setup.   

------------------------------
2. Uninstallation Instructions
------------------------------
* Uninstall from Add/Remove Programs
(This method is recommended if driver is previously installed by Setup program.)
1. Start Add/Remove Programs from Control Panel.
2. Select "ULi RAID Driver" item.
3. Click on "Remove" button.

* Uninstall from Device Manager
1. Start Device Manager from Control Panel's System applet.
2. Right click on "ULi SATA/RAID Controller" item, 
   then select "Remove" (or "Uninstall") item from the popup menu.


-------------------
3. Driver File List
-------------------
    Driver Folder
     |- win_32                Windows 2000/XP/Server 2003 driver
     |  |_ ulisata.inf
     |  \_ m5287.sys
     |- WIN_64                Windows XP/Server 2003  x64 driver 
     |  |_ ulisata.inf
     |  \_ m5287.sys
     |- disk1                   Driver disk label
     \_ txtsetup.oem            Windows 2K/XP setup file

* Vista driver need "all files" in i386 (AMD64) directory 
  (tested on Vista beta Build 5320)
     Driver Directory 
     |- i386                 Vista driver
     |  |_ ulisata.inf
     |  |_ coin5288.dll
     |  |_ m5287.sys
     |  |_ m5288.sys
     |  \_ m5289.sys
     \- AMD64                Vista x64 driver
        |_ ulisata.inf
        |_ m5287.sys
        |_ m5288.sys     
        \_ m5289.sys 

---------------------
5. Driver Change List
---------------------
   6.1.0.0
   1. First release and RAID function is not supported.
   2. Hot-plug is supported. (Win2000/XP)

   6.1.0.1
   1. Remove hot-plug function for customer's request.
   2. Hot-plug is not supported. (Win2000/XP)
   3. RAID function is not supported.

   6.1.0.2
   1. For passing ESD test.
   2. Hot-plug is not supported. (Win2000/XP)
   3. RAID function is not supported.

   6.1.0.3
   1. To reduce error recovery time while doing ESD test.
   2. Hot-plug is not supported. (Win2000/XP)
   3. RAID function is not supported.

   6.2.0.0
   1. First release to support RAID function.
   2. Hot-plug is supported. (Win2000/XP)

   6.2.0.1
   1. Solve the problem that sometimes system is unable to enter S4 
      (Hibernation) state if OS is on RAID 0+1 drives.
   2. Solve the problem that system spends more time than expected
      while doing duplication for "Mirror" RAID type.
   3. Hot-plug is supported. (Win2000/XP)

   6.2.0.2
   1. Solve the problem that system spends more time than expected
      while doing synchronization for "Mirror" RAID drives. (Win2000/XP)
   2. Solve the problem that system may have BugCheck 0xD1 if SiliconImage
      Image PATA-SATA bridge (A-Bit) is used and connected to WD PATA 200GB 
      HDD to form a "Mirror" drive with other SATA drive.

   6.2.0.3
   1. Solve the problem that system may become busy when there is no CD disc
      inserted in CDROM drive.
   2. To support PATA-SATA bridge card which is made by GigaByte.

   6.2.0.4
   1. Support Windows XP x64.

   6.2.0.5  
   1. Support RAID 0 applied on four drives if RAID BIOS V1.13 or later 
	revision is used.
   2. Add Disk Reliability Status Monitor (SMART).
   3. Support "Native Command Queuing".
   4. Solve the problem that system may crash if system SATA disk (where
      you boot OS from this disk) is used to create RAID 1 (Mirror) with 
      another disk by ULiRAID utility.

   6.2.0.6 
   1. Solve the problem that system may become busy while formatting RAID 1
	drive (not Quick Format).
   2. Solve the problem that system memory space allocated is not released
      in ULiRAID utility and may cause poor system performance.

   6.2.0.7 
   1. Solve the problem that sometimes hot-plug event is not detected.

   6.2.0.8 
   1. Solve the problem that "Information" in ULi RAID utility is not
      shown properly in Simplified Chinese version of WinXP.
   2. Improve "burst read" performance.

   6.2.0.9 
   1. Solve the problem that system may hang up when SATA device is 
      plugged in (WinXP x64).
   2. Solve the problem that system may hang up when 2nd SATA drive of RAID 1
      (mirror) array is removed.
   3. Show warning message on the following steps (ULi RAID utility):
      (1) Remove one of the RAID 1 (mirror) drive when system is powered off.
      (2) Boot into Windows OS

   6.2.1.0 
   1. Solve the problem that Event Notification mail may not be sent out
      (ULi RAID utility).
----
Note
----
 1. Don't remove ULi RAID Driver by "Add/Remove Program" if hard drives are
    boot devices and OS is Win2000 or WinXP. (Boot device means you boot OS 
    from it)
