ABIT AN7

Specifications | Manual | Drivers | Utilities | BIOS | Reviews/Links


The AN7 is a retail Socket A (462) motherboard built by ABIT.

ABIT AN7 Socket A Motherboard


Specifications

CPU Support Chipset Memory SATA 1.5 Gbit/s RAID Audio LAN IEEE 1394 (Firewire) Internal I/O Back Panel I/O BIOS Miscellaneous ABIT Engineered


Manual

Download the manual for ABIT AN7

ABIT AN7 manual (zipped PDF, 1.99 MiB)


Drivers

ABIT AN7 drivers can be downloaded here

For using Dolby Digital 5.1 via the SoundStorm APU install the NVIDIA audio driver.

part driver size date system
Audio Realtek AC'97 v6305 12.0 MiB 2009/09/07 Windows Vista/7
Realtek AC'97 A4.06 10.9 MiB 2008/10/01 Windows 98/98SE/ME/2000/XP/2003
Realtek AC'97 A4.06 5.76 MiB 2008/10/01 Windows NT4
Realtek AC'97 A4.06 5.75 MiB 2008/10/01 Windows 95
Audio
Chipset
LAN
NVIDIA nForce2 v5.10 7.00 MiB 2004/09/17 Windows 2000/XP
NVIDIA nForce2 v4.27 4.16 MiB 2004/07/19 Windows 98SE/ME
SATA SiI3112 RAID v1.0.65.1 131 KiB 2010/02/01 Windows 2000/XP/2003/Vista/7
SiI3112 RAID v1.00.51 112 KiB 2004/09/21 Windows NT4/98SE/ME


Utilities

ABIT AN7 utilities can be downloaded here, abit uGuru is mainly interesting for retro reasons. If you only want to measure temperatures and fan speeds, it's recommended to use newer and still supported tools like SpeedFan which are also more stable.

tool/version size date system
abit uGuru v1.24 7.22 MiB 2004/12/29 Windows 2000
Windows XP


BIOS

Download the latest BIOS update for ABIT AN7. Changelog is included below. For flashing the BIOS use awdflash 8.99 (DOS), AwardBIOS Winflash 1.94 (Windows), UniFlash (DOS) or flashrom (Unix/Linux) which can be found under flash tools. Please pay attention to the prerequisites and precautions.

2005/06/13 - BIOS 19 (283 KiB)
  1. Add AMD XP OEM processor 2800+ support.
  2. Enhance CPU compatibility with Sempron 2200+.
2004/11/23 - BIOS 18
  1. Added new CPU support.
  2. Enhanced memory compatibility.
  3. Calibrated CPU frequency.
2004/08/06 - BIOS 17
  1. AMD Sempron CPU support.
2004/07/30 - BIOS 16
  1. Added "Wake Up By OnChip LAN" item.
  2. Fixed a problem where the system cannot boot into Windows if
    1. The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present.
    2. The PATA hard disk is removed after the OS installation.
  3. Corrected "Restore on AC Power Loss" item.
  4. Fixed OS shutdown function failure if "USB Mouse Support via BIOS" is enabled.
2004/03/04 - BIOS 15
  1. Added Auto-Shutdown function when CCMOS jumper is set to pins 2-3. The correct CCMOS jumper should be on pins 1-2; in case it is placed on 2-3, the CPU core voltage will be abnormally high, an the system will shut down automatically to protect the CPU from damage.
  2. Fixed an issue where USB-ZIP will be detected as a harddisk.
  3. Updated SI3112 SATA BIOS to v4.2.47.
  4. Revised the characters in "Wakeup by Alarm".
  5. Enhanced USB 2.0 device compatibility, "Integrated Peripherals / OnChip PCI Device / USB 2.0 Device Compatible / Disabled -> Enabled".
  6. Fixed an issue where SCSI boot ID cannot be selected when certain SCSI cards are installed.
  7. Fixed an issue where SATA HDD boot up will fail if a PS/2 mouse is not installed.
  8. Fixed an issue where the system will show 119 degrees under certain circumstances.
2004/01/06 - BIOS 14
  1. Changed default RTC year to 2004.
  2. Updated Silicon Image 3112 controller ROM to version 4.2.43.
  3. Added CPU fan fail warning option.
  4. Added AGP frequency on the fly option.
  5. Saved CPU default ratio to µGuru.
  6. Added SATA ROM control option.
  7. Fixed mouse power on fails to function when using certain mice.
  8. Enhanced compatibility with WD400AB hard disk.
  9. Synchronized FanEQ temperature settings with OC Guru.
  10. Reduced the time it takes to resume from STR state when using Windows 98 and Windows ME.
  11. Added "Full screen logo show" option.
2003/11/13 - BIOS 13
  1. Fixed the problem where after pressing "F8" for OC on the fly and then pressing ESC, the image on screen will become distorted.
  2. Fixed the wake on ring fail problem.
  3. Fixed the problem where a SATA hard disk will not respond after resuming from S3 mode.
  4. Updated DRAM DMI information and revised the wording of memory status from "DDR SDRAM at Bank" to "DDR at DIMM" in the system configuration table.
  5. Fixed the problem where the DRAM timing is not changed after saving and exiting the BIOS.
  6. Enhanced SATA device stability.
  7. Added resume from S3/S4 mode using USB devices.
  8. Fixed the problem where the system cannot boot into Windows if
    1. The OS is installed in the SATA hard disk when both the SATA and PATA hard disks are present
    2. The PATA hard disk is removed after the OS installation.
2003/11/11 - BIOS 12
  1. First release.


BIOS ID strings and BIOS messages for ABIT AN7 BIOSes are listed below.

BIOS ID string BIOS Message
06/13/2005-nVidia-nForce-6A61BA1DC-19
11/23/2004-nVidia-nForce-6A61BA1DC-18
08/06/2004-nVidia-nForce-6A61BA1DC-17
07/30/2004-nVidia-nForce-6A61BA1DC-16
03/04/2004-nVidia-nForce-6A61BA1DC-15
03/04/2004-nVidia-nForce-6A61BA1DC-00
01/06/2004-nVidia-nForce-6A61BA1DC-14
11/13/2003-nVidia-nForce-6A61BA1DC-13
11/11/2003-nVidia-nForce-6A61BA1DC-12
n/a
n/a
n/a
n/a
n/a
(an7_15.b02) EVALUATION ROM - NOT FOR SALE
n/a
n/a
n/a


Reviews / Links

Reviews, tests, articles and other related links for ABIT AN7

sitemap | privacy policy | copyright © soggi 2001-2020