ABIT RocketBoy AV8
Specifications | Manual | Drivers | Utilities | BIOS | Reviews/Links
The RocketBoy AV8 is a retail Socket 939 motherboard built by ABIT. It's basically a ABIT AV8-3rd Eye with RocketBoy branding (other colors). RocketBoy is the nickname of a famous gamer like Fatal1ty is also one.

Specifications
CPU Support
- AMD Athlon 64 (Clawhammer, Newcastle, Winchester, Venice, San Diego, Manchester, Toledo)
- AMD Athlon 64 FX (Clawhammer, San Diego, Toledo)
- AMD Athlon 64 X2 (Manchester, Toledo)
- AMD Opteron (Venus)
- AMD Sempron (Palermo)
Chipset
- VIA K8T800 Pro / VT8237R
- NB/SB interconnection via Ultra V-Link with 1066 MB/s
- Supports HyperTransport interface (800/1000 MHz)
- Supports Advanced Configuration and Power Interface (ACPI)
- Supports Universal Serial Bus (USB 2.0/1.1)
- Supports up to AGP 8x (AGP 2.0/3.0, 1.5V/0.8V)
- Supports PCI v2.2
- Supports IDE/PATA with up to UDMA133
- Supports Serial ATA 1.5 Gbit/s
- Supports Serial ATA RAID modes 0, 1, JBOD
Memory
- 4 184-Pin DIMM sockets supporting DDR-SDRAM
- Supports up to 4 DIMMs DDR 200/266/333/400
- Supports up to 1 GiB DIMMs
- Supports max. 4 GiB RAM
- Supports 128 bit memory interface (Dual Channel)
Audio
- VT8237 integrated VIA AC'97 audio controller
- Realtek ALC658 AC'97 audio codec
- AC'97 2.3 compliant
LAN
- VIA Velocity (VT6122)
- integrated Cicada SimpliPHY transceiver
- Supports 10/100/1000M Gigabit Ethernet
- Connected via PCI
IEEE 1394 (Firewire)
- VIA VT6306
- Supports 100/200/400 MBit/s data transfer rate
- Connected via PCI
Internal I/O
- 1 AGP
- 5 PCI
- 2 SATA
- 2 PATA/IDE
- 1 Floppy port
- 2 USB 2.0/1.1 headers
- 2 IEEE 1394 (Firewire) headers
- 1 FrontPanel audio header
- 1 µGuru Clock header
- AUX-IN, CD-IN
Back Panel I/O
- PS/2 keyboard
- PS/2 mouse
- 4 USB 2.0/1.1 ports
- 1 IEEE 1394 (Firewire) port
- 1 RJ45 (LAN)
- 1 RS-232 port (COM)
- 1 parallel port (LPT)
- Audio connectors (3 line-out, line-in, mic-in, TOSLINK-S/PDIF in, TOSLINK-S/PDIF out)
BIOS
- 4 MBit Flash EEPROM (PLCC32)
- Phoenix - AwardBIOS v6.00PG
- Supports Plug-and-Play (PNP)
- Supports Advanced Power Management (APM)
- Supports Advanced Configuration and Power Interface (ACPI)
- Supports Desktop Management Interface (DMI)
Miscellaneous
- ATX form factor
- 20 pin ATX power connector
- 4 pin 12V power connector
- ABIT µGuru (Winbond W83L950D) hardware monitoring chip (ASIC)
- Winbond W83627HF-AW hardware monitoring and Super I/O chip
- Winbond W83303D ACPI controller
- ICS 950403CF clock generator (PLL)
- Intersil ISL6559CB multiphase PWM controller (2-/3-/4-phase operation)
- 5 3-pin FAN headers
- 9 mounting holes
ABIT Engineered
- ABIT µGuru Technology
- ABIT EQ
- ABIT OC Guru
- ABIT Flash Menu
- ABIT Black box
- ABIT SoftMenu Technology
- ABIT FanEQ Technology
- ABIT CPU ThermalGuard Technology
Manual
Download the manual for ABIT AV8(-3rd Eye)
ABIT AV8(-3rd Eye) manual (zipped PDF, 1.82 MiB)
Guru Clock manual (zipped PDF, 872 KiB)
Drivers
ABIT AV8(-3rd Eye) drivers can be downloaded here
| part |
driver |
size |
date |
system |
| Audio |
Realtek AC'97 v6305 |
12.0 MiB |
2009/09/07 |
Windows Vista/7 |
| Realtek AC'97 A4.06 |
10.9 MiB |
2008/10/01 |
Windows 98/98SE/ME/2000/XP/2003 |
| Realtek AC'97 A4.06 |
5.76 MiB |
2008/10/01 |
Windows NT4 |
| Realtek AC'97 A4.06 |
5.75 MiB |
2008/10/01 |
Windows 95 |
| USB 2.0 |
included |
- |
- |
Windows Vista/7/8/8.1/10 |
| VIA v2.70p |
2.96 MiB |
2005/10/03 |
Windows 98/98SE/ME/2000/XP |
Utilities
ABIT RocketBoy AV8 utilities can be downloaded here, abit uGuru is mainly interesting for retro reasons. If you only want to measure temperatures and fan speeds, it's recommended to use newer and still supported tools like SpeedFan which are also more stable.
| tool/version |
size |
date |
system |
| abit uGuru v2.126 |
4.61 MiB |
2005/01/13 |
Windows 2000
Windows XP |
BIOS
Download the latest BIOS update for ABIT AV8(-3rd Eye). Changelog is included below. For flashing the BIOS use (DOS), (Windows), (DOS) or (Unix/Linux) which can be found under flash tools. Please pay attention to the prerequisites and precautions.
2006/05/07 - BIOS 28 (264 KiB)
- Support DRAM Command Rate adjusting function for ADA3700DKA5CF and ADA4000DKA5CF.
- Enhanced compatibility with Areca 1110 PCI-X storage card.
|
2006/02/23 - BIOS 27
- Fixed the issue that the system may not be able to boot when installed the processor of Rev. E.
- Enhanced compatibility with certain PCI RAID cards.
- Support FX-60.
|
2005/11/08 - BIOS 26
- Enhanced compatibility with certain VGA cards.
- Enhanced compatibility with certain PCI SCSI cards.
- Add new CPU support.
|
2005/07/28 - BIOS 24
- Fixed the issue that with certain VGA card does not work with four 1GB RAM modules.
- DRAM Command Rate, Row Refresh Cycle Time, Read to Write Delay now work as intended.
- Recalibrate CPU temperature.
- System now can resume from S3 without problem.
|
2005/07/04 - BIOS 22
- Cool n' Quiet now works as intended.
- Disable Cool n' Quiet function when the multiplier is manually changed in the BIOS.
|
2005/06/16 - BIOS 21
- Update code base to 5/31 award code.
- Update MCT2.
- Support dualcore CPU.
- Fix "CMOS Checksum fail message" when select DRAM Timing value.
- Delete "workstation" at POST.
- Full screen logo.
- Fixed "can not load SATA , LAN ROM issue".
|
2005/04/20 - BIOS 20
- Add AMD Rev. E CPU support.
- Add new DRAM timing items.
|
2005/01/19 - BIOS 19
- Add RocketBoy AV8 support.
- Change the default RTC year to 2005.
- Fixed minor DRAM timing issue.
|
2004/11/12 - BIOS 17
- Updated µGuru Utility to uav8_019.bin.
- Updated SATA ROM.
- Added "Delay Transactions" item.
- Added "PCI Latency Timer function" item.
- Removed an error message that appears if the year is modified and a SAVE&EXIT is executed.
- Fixed an issue where pressing TAB key to skip the OSB logo caused the Memory Information & Memory Clock to be missing.
- Changed "USB 2.0 Controller" defaulted to "Enabled", and synchronized it with the "OnChip USB Controller" setting.
- Synchronized "DDR Voltage" & "SB Voltage" in the PC Health item if modified.
- Changed "Resume by OnChip USB" default to "Enabled".
- Changed "ACPI Suspend Type" default to "S3".
- Added DMI information.
- Calibrated CPU temperature.
- Added "Dual Channel Enabled 128bit" when in Dual Channel mode.
|
2004/10/12 - BIOS 16
- Enhanced compatibility with D0 stepping FX-55 and 3200+ CPUs.
|
2004/09/17 - BIOS 15
- Updated µGuru Utility to uAV8_017.BIN.
- Updated CPU micro code.
- Calibrated CPU temperature.
- Calibrated "Delay IDE Initial" function timing.
- Default ACPI Suspend Type changed to S3.
- Fixed abnormal warning beep.
|
2004/09/03 - BIOS 14
- Updated uGuru Utility to uAV8_015.BIN.
- Fixed non-adjustable "Shutdown Temp" & "Beep Temp" items in ABIT-EQ Temperature Monitoring.
- Calibrated certain CPU frequency issues.
|
2004/08/11 - BIOS 13
- Updated uGuru Utility to uAV8_014.BIN.
- Fixed an issue where the "LDT & PCI Bus Control" item's "16bit" function would fail.
- Added "Fixed (74Mhz)" in AGP Ratio item.
- Modified "LDT Bus Frequency" item from FSBx5, x4, x3, x2 to x1, and removed "Auto" selection.
- Added FSB up to 410 MHz & enhanced stability over 300 MHz.
- Removed HyperTransport Voltage 1.4V.
|
2004/05/25 - BIOS 12
- First release.
|
BIOS ID strings and BIOS messages for ABIT AV8(-3rd Eye) BIOSes are listed below.
| BIOS ID string |
BIOS Message |
05/17/2006-K8T800P-8237-6A7L1A19C-28
02/23/2006-K8T800P-8237-6A7L1A19C-27
11/08/2005-K8T800P-8237-6A7L1A19C-26
07/28/2005-K8T800P-8237-6A7L1A19C-24
07/04/2005-K8T800P-8237-6A7L1A19C-22
06/13/2005-K8T800P-8237-6A7L1A19C-21
04/20/2005-K8T800P-8237-6A7L1A19C-20
01/19/2005-K8T800P-8237-6A7L1A19C-19
11/12/2004-K8T800P-8237-6A7L1A19C-17
10/12/2004-K8T800P-8237-6A7L1A19C-16
09/17/2004-K8T800P-8237-6A7L1A19C-15
09/03/2004-K8T800P-8237-6A7L1A19C-14
08/11/2004-K8T800P-8237-6A7L1A19C-13
06/16/2004-K8T800P-8237-6A7L1A19C-12 |
Reviews / Links
Reviews, tests, articles and other related links for ABIT AV8(-3rd Eye)